Analytics

Showing posts with label lowering. Show all posts
Showing posts with label lowering. Show all posts

Friday, 26 April 2013

Front splitter wanted...

I'm currently on the look out for a slim-profiled front splitter to sit under the Sportline chin.

Must not be the popular Seat Leon Cupra R splitter that many others have fitted (too rounded). So far, I've looked at Mk2 and Mk3 Golf, Renault Espace, various Vauxhall splitters and plenty of eBay-specials!

The look I'm trying to achieve:


Just enough to visually lower the front a little further. All ideas and recommendations will be gratefully received - I'm quite happy to break out the Dremel and junior-hacksaw if required.

Sunday, 24 February 2013

Airride - time for some pics

The novelty is far from wearing-off. Parking up becomes funny wherever you go; airing-out in front of unsuspecting passers-by with a loud 'Pttsssssshhhhh' seems to stop people in their tracks.

Here's a few 'aired-out' (that's all four bags devoid of any air pressure) pics to whet your appetite - click any pic for a larger version:


So far, the ilevel app has been faultless; being able to pre-set ride-heights and have the trim-mode set to permanently monitor ride-height is awesome.

Here's the van in setting 3 - 90% full - Ideal for getting on to campsites, rough terrain etc. Ride quality is good at this height if a little firm.


Here's another pic with the van set to pre-set 2 - daily driving - looks cool and driveable. Ride quality is fine at this height; similar to factory.


And between the presets we have any infinite variation of height and rake, perfect for leveling up at a campsite:

Nose up, back down - good for those sloping Welsh campsites.
Nose down, back up - for that hot-rod rake!
Being able to control all four corners independently means side-to-side slopes can also be dealt with. Here's driver's side front and rear up and passenger side front and rear down:


Camping whilst there's very little air in the bags also gives a firmer base - no longer when turning over in the night does it feel like the whole van is moving. Dubfreeze was a great night's sleep.

You'll notice there's no pics of the eLevel touch pad on the dash yet. I'm still undecided as to how I'm going to mount it. I'm tempted to remove one of the heater outlets next to the head-unit and flush-mount it there. For the time being it will sit loose on top of the dash.

So that's the airride in a nutshell. If you have any questions (just not 'how much?') feel free to get in touch using the ask Stone174 link at the top of the blog.


Stone174 airride specs:
Airrex front bagover struts and rear bags/dampers.
Viair twin 480 air compressors
Accuair 5 gallon air tank
Accuair VU4 solenoid valve unit
Accuair eLevel management
Accuair iLevel iphone integration module

Fitting/setup by iKustoms

Thursday, 14 February 2013

Friday, 8 February 2013

Early progress...


Nothing like waking up to find an email sent late in the previous night:

Compressor mounts made and installed
Compressor wiring done and tested
ECU mounted
Valve block mounted
Power cables run
Wiring is into the dash area

Will be making tank mounts first thing and running the first air lines, Should be able to pressure up that side of it by lunch

Struts and bags will be going on Monday



The touchpad will be left loose for now, maybe mounted permanent at a later date. More updates soon...

Monday, 4 February 2013

And so it begins...

Parts arriving ready for dropping the van off on Wednesday.



Saturday, 15 December 2012

Taking things to another level

So I guess you're thinking 'where does Stone174 go from here? - the van looks pretty sorted and perfectly fit for purpose as a campervan'. Well, as a closet-perfectionist, there's still loads of little details that I'm not happy with. One big detail that isn't to my liking is the suspension, time for the whole story...

When first taking the van over to Merseyspeed to discuss the colour-coding/facelift options, I mentioned that I was looking to swap the -40mm H&R lowering springs for coilovers. My reasons were that I wanted some adjustment in the front to lessen the gap between wheel arch and tyre, and to sit the (now slightly driver's-side heavy due to interior) van completely level - it was about an inch or so out at the back.

Coilovers are ideal for this as you can simply wind up or down each corner until everything sits perfectly level. I had done some research and was about to commit my hard-earned to Bluebird Customs for a set of Gaz coilovers when Merseyspeed offered us a deal on a set of Prosports with free fitting, seeing as the van was in for so much work.

Why didn't I listen to my own mantra of 'buy cheap, buy twice'? The Prosports were great for approx 200 miles when, after traversing a large speed bump at less than 5mph, the fronts seemed unsettled. Since then they have creaked, groaned and clonked in protest. I've had them checked-out in-situ and everything looks and feels fine, but it seems the spring just isn't seating correctly - just a few minutes research on the forums and it seems there's a whole batch of T5 owners on Prosport coilovers with exactly the same symptoms.

I don't blame Merseyspeed for this, they had fitted sets before without complaint. But I'm now forced to look at other options when they should have been a fit-and-forget item.

So in the true Stone174 style of using a sledgehammer to crack a nut, here comes the solution...


Remember in old posts I used to say this was to be a 'no compromise' van. It has to be air ride. To begin with I started to repeat the 'buy cheap, buy twice' mantra (don't worry readers, I'm not going mad) and the research started. There's quite a few companies offering a variety of setups, some better than others, some with a good reputation, some that are obviously 'budget' and some that are in the realms of lottery winners. Whilst I was keen not to make similar mistakes as with the coilovers, I have had my eye on one setup that stands out amongst all the others - Accuair - and with the announcement of a very special add-on being released just as I have the funds to fit air, made it all the more an obvious choice.

All air ride setups consist of the same component parts; bags and struts, compressors, tank and valves, and a management system. One great feature of fitting this to a T5 is that it all mounts externally underneath and can be unbolted and transferred to the next van if required. No welding, no chopping.

Bags and struts
High durability 2-ply double convoluted air springs help provide both a comfortable ride at driving height and maximum drop when aired out. Compression fittings are used to ensure a reliable leak free seal when used with 6mm or ¼ inch DOT nylon air tubing.
The front strut is fully threaded to maximize adjustability similar to that of a coilover. You can easily adjust for maximum drop or for maximum comfort at driving height by simply loosening the lower lock collar and turning the damper and air spring assembly up or down, perfect to dial-in a sweet stance. The strut has a 12 click adjuster for damping and rebound.


Compressors, tank and valves
Using 2x 480 compressors and a 5 gallon tank will allow the bags to quickly replenish. The T5 won't be a dancing lowrider seen in music videos! As with any compressed air system, water tends to collect over time. The setup will have inline water traps that can be easily emptied by raising the van up to the highest setting and reaching in and draining. The valve unit is the element that sits in the middle between management and bags to distribute air to each corner - Accuair's is one of the best there is.


Management
This is the 'brain' of the setup. The absolute killer feature of the Accuair setup is that it 'knows' where each corner is at any given time - other systems work on calculating the air pressure at each corner, good but not precise. Pushrods and level sensors feed information back to the management system to keep the van at a pre-set constant. You could load a washing machine into one corner of the van and it would re-level to suit.


The e-Level touchpad (which will be somewhere on the dash) gives total control and three pre-sets;
90% full - this is almost like stock ride height
Drive height - a nice useable lowered setting
Low cruise - perfect for running low on the motorway where steering input is limited.

Then press and hold the 'all-out' button for five seconds to drop the van when parked.

Down the right hand side of the touchpad is a set of controls for individual adjust; both front up or down, both rear up and down, plus individual corner tweaking - this will be ideal for uneven campsites!

And the special add-on I mentioned? How about a replica of the touchpad on your iphone - yes please!


Here's a little demonstration:



The final component in the whole setup is possibly the most important of all - they guy who fits it (no pressure!). For this task I've chosen to go with iKustoms. For a number of reasons; firstly, they've had their own T5 running this setup so are familiar with it. Geographically they aren't a million miles away, like a lot of others offering Accuair. And finally, they are good people who take pride in everything they put their name to - from the very first email I've had nothing but sound advice, all my questions answered - and there have been some questions! - and a genuine excitement for getting the van in and starting the transformation.

Nut-cracked? I hope so. The struts are paid-for and are being built at the moment, I'll keep you informed of the other elements during the build up to the big day - the van goes in early February 2013 - and hopefully some in-progress pics will be up whilst the van is in.

Tuesday, 9 February 2010

A wheel dilema...

Its coming up to the point where I'd like to get the wheels swapped. For me its one of the biggest modifications to make; they say 'the wheels maketh the car' and I certainly believe the right (or wrong) wheel choice can affect the appearance of the whole vehicle.
As a regular reader you'll know the van is already lowered by 40mm, not only has the sharpened the handling up a little, it has also removed the big gap between arch and wheel (as in the picture above - no photoshop job here!)

First consideration is proportion. The right wheel size will be determined by the final rolling diameter - this is important so as not to throw the speedo out of kilter - for example: 16" steel wheels with a 205/65 tyre have approximately the same overall diameter as a 20" alloy wheel with a 245/35 tyre. To make sense of all this take a look at this handy tyre calculator. More wheel, less tyre...

But its a fine balance. Too little sidewall is a compromise on ride quality. Too much sidewall means a smaller wheel - not worth the upgrade. Some vans look okay with 17 and 18 inch wheels, but they're not for me. 19 inch tyres seem to be ridiculously expensive; I think thats because they're not fitted to many modern cars - some website deals show 19" wheel and tyre packages dearer than 20"!!! Ideally I'd like to fill the arches with a 20 inch wheel running a 40 section tyre.

All sounding straightforward so far, isn't it?

So what else is there to consider? Well, its a van, so load-ratings should be taken into account. As our van is a T30 it has a 3000kg load capacity which equates to 750kg per corner - this is what the wheel has to carry. As our camper-conversion will be nowhere near that weight I'm a little unsure as to whether load-rating might be overkill. Naturally most alloy wheel retailers won't sell you a wheel that isn't spec'd for a T5 due to potential liability issues.
Load rating on the tyre will be taken into account though, enough to cope with the van's kerb-weight.

Tyre width - this usually varies between 8.5J and 10J for a 20" wheel, ideally I'd like to keep it nearer the 8.5 or 9J mark, a 10 inch wide front tyre starts to get a bit hefty.

Standard PCD or adaptors? Our old T3 ran Porsche Design 90's which had a PCD (Pitch Circle Diameter - the distance between the bolts) of 5x130. These needed adaptors to fit to the T3's PCD of 5x112. Great until you have a puncture and need to fit a standard spare - wheel off, adaptors off, wheel on...
This time I'd like to fit direct to the T5's PCD of 5x120. This is the same as BMW, Range Rover and Land Rover. I've started to see a lot of 'tarted-up' T5s running these wheels and for that reason, I won't be fitting wheels from any of these vehicles.

So, after scouring the v-dub shows and surf-spot car parks, I finally found the perfect wheel. It is listed on a major alloy wheel retailer's website as being ideal for the T5 - so I inquired about maybe changing the tyre profile only to be told the wheel isn't suitable due to it not being load rated and shouldn't have been listed on their site.

Annoying to say the least.
Everything was right and now I'm back to square-one. Even more annoying is that I have seen this wheel on the internet fitted to T5s and Touaregs so surely it can handle the weight of our barely-laden van?!?!

Here's the wheel in question:

TSW Montage in Black with polished rim. If you've seen them fitted to a T5 could you let me know, likewise if you know of an alternative I'd be most grateful if you could point me in the right direction, thanks.

Wednesday, 11 November 2009

Lowering: Pros and Cons


There's been quite a lot of discussion recently about whether to lower a T5 or not. Earlier in the year I went for a 40mm drop using H&R springs - in the no-too-distant future I intend to fit larger wheels and tyres and (in my own opinion) feel the T5 looks better lowered with larger rims than when left at stock height. Also note that I have never have, nor want to, read Max Power magazine or go to a car-meet at Tescos on a Friday night...

Previous vehicles in my garage have included a 1966 Beetle (lowered), a Mk1 Golf (lowered), a Lupo GTi (lowered from factory) and a T3 panel van (lowered). Like many other T5 owners I need to be able to get up farm-tracks into campsites, up forest roads with mountain bikes, over speedbumps at B&Q, etc, etc...



The Beetle could barely get over cats-eyes (cool at the time), the Golf was returned to stock (part of the resto), the Lupo was about as much fun as you can have in public with your clothes on, and the T3 was lowered twice; once with cut-springs - trawler-like handling (I know - we were skint), and then again with proper AVO springs and shocks. The T3 was the only vehicle to 'scrape' regularly due to the front-end overhang.

To-date we haven't caught the T5 on anything. Handling is much improved; the van doesn't wallow into roundabouts and isn't unsettled by mid-corner bumps. The overall ride isn't compromised and feels as good as stock-height. Granted, there's usually only ever going to be two of us in the van, your own situation might be different.

Other plus points include; being able to fit the drive-away awning slightly easier, not worrying about car-park height restrictions, the Mother-in-law can get in without complaining!

Brickwerks now stock a range of options for lowering your T5 from KW, H&R, Eibach and Bilstein - to suit differing sizes of wallet too.

One last option if you want to go really low is air-ride:


...if that's what floats your boat.